Impact of pulsed electric field intensity on the cream separation efficiency from bovine milk and physico-chemical properties of the cream.

Low-temperature (9-12 °C) pulsed electric field (PEF) was investigated in milk before cream separation at different intensities (9-27 kV/cm, 66 µs, 16-28 kJ/L) regarding its potential to render processing more sustainable, retain a high physico-chemical quality, enhance functional properties, and gently modify the structure of the milk fat globule membrane (MFGM). Cream volume per L milk were most efficiently increased by 31 % at the lowest PEF intensity in comparison to untreated milk and cream (P < 0.05). Untreated and PEF-treated milk and obtained cream were assessed with compositional (fat, protein, casein, lactose, and total solids content) and particle size distribution analyses, showing no significant differences (P ≥ 0.05) and, thus, indicating retention of 'native-like' product quality. Overrun and stability of cream, whipped for 20 and 60 s at 15000 rpm using a high-shear mixer, were improved most notably by the lowest and the highest PEF intensities, achieving up to 69 % enlarged overrun and up to 22 % higher stability, respectively (P < 0.05), than in untreated whipped cream. Protein component analyses for milk and cream were carried out by sodium dodecylsulphate-polyacrylamide gel electrophoresis (SDS-PAGE). Noticeable differences between untreated and PEF-treated milk were not observed, but the SDS-PAGE results for cream showed noticeably different bands for some of the protein components, indicating structural changes in MFGM-, whey-, and phospho-proteins due to PEF and/or separator processing effects. More intense bands of xanthine oxidase, xanthine dehydrogenase, butyrophilin, bovine serum albumine, adipophilin (ADPH), and glycoproteins PAS6/7 were observed specifically at 21 kV/cm. Gentle electroporation of both MFGM layers by PEF was determined based on the changes in MFGM monolayer components, such as ADPH and PAS 6/7, exhibiting intensified bands. PEF intensity-dependent impact on the structure of MFGM and casein, leading to a reconfiguration of the cream matrix due to different structuring interactions among proteins, among milk fat globules, and between fat and protein components, was suggested. Overall, low-temperature PEF applied at different intensities showed great potential for gentle, efficient, and functional properties-tailored dairy processing and may also enable effective extraction of highly bioactive ingredients from dairy sources.

Layered food designs to create appetizing desserts: A proof-of-concept study.

Creating layers in foods is a culinary technique commonly used to diversify sensory experiences, but it has not been reported scientifically on its effect on hedonic and appetitive responses. This study aimed to investigate the use of dynamic sensory contrasts in layered foods to stimulate liking and appetite, using lemon mousse as a model. A sensory panel evaluated the perceived sour taste intensity of lemon mousses acidified by various amounts of citric acid. Bilayer lemon mousses with unequal distribution of citric acid across the layers to deliver higher levels of intraoral sensory contrast were developed and evaluated. A consumer panel evaluated the liking and desire to eat lemon mousses (n = 66), and a selection of samples was further investigated in an ad libitum food intake setting (n = 30). In the consumer study, bilayer lemon mousses with a layer of low acidity (0.35% citric acid w/w) on top and higher acidity (1.58 or 2.8% citric acid w/w) at the bottom showed consistently higher liking and desire scores than their corresponding counterparts with identical acid levels equally distributed in a monolayer. In the ad libitum setting, the bilayer mousse (top: 0.35; bottom: 1.58% citric acid w/w) had a significant 13% increase in intake compared to its monolayer counterpart. Modulating sensory properties across food layers with different configurations and layer compositions can be further explored as a tool to design appetizing foods for consumers at risk of undernutrition.

Impact of Physicochemical Modifications in Casein Promoted by UV-C on the Peptide Profile of Gastric Digestion and the Transepithelial Transport of Peptides.

Caseins are the main proteins in milk, and their structure and spatial conformation are responsible for their slow digestion rate. The release of bioactive and ß-casomorphin peptides from casein digestion may induce allergic responses during consumption. Spectroscopic techniques were used to observe the structural changes in casein conformation induced by Ultraviolet light irradiation (UV-C). Raman spectroscopy results showed more pronounced peaks at 618 and 640 cm-1 for phenylalanine and tyrosine moieties of the photolyzed micellar casein, respectively, suggesting changes in the micelle structure. The decrease in the intensity of Raman signals for tryptophan and tyrosine corroborates to the UV-C-induced modifications of the micelle structure. Particle size distribution showed a decrease in the average micelle size after 15 min of UV-C exposure, while low-temperature, long-time (LTLT) pasteurization led to the formation of large aggregates, as observed by atomic force microscopy. UV-C did not impact the formation or transport of peptides, as observed by using the Caco-2 cell as a model for peptide absorption. However, the absence of the opioid peptide SRYPSY from κ-casein and only 20% of the concentration of opioid peptide RYLGY were noted. This work demonstrated that UV-C can be utilized to induce the physicochemical modification of dairy products, promoting a higher digestion rate and reducing allergenicity.

Effect of coagulation temperature on cooking integrity of heat and acid-induced milk gels.

Heat and acid-induced milk gels do not melt or flow upon heating and thus show great potential as a dairy-based protein source for cooking, e.g. for stews. Understanding how processing, e.g. acidification, affects the cooking behavior of these gels is therefore of great industrial interest. The cooking integrity of gels produced by rapidly acidifying milk using citric acid at temperatures of 60, 75, and 90 °C, was determined by analyzing composition, texture, and spatial water distribution before and after cooking. Increasing the acidification temperature from 60 to75 °C resulted in a significant reduction of yield, due to decreased moisture content of the gels. With increasing content of solids, the gels grew harder and denser, as observed by texture profile analysis and low-field Nuclear Magnetic Resonance. Upon cooking the 60 °C gel lost a significant amount of moisture, due to the contraction of the porous protein network. The more compact gels, prepared at 75 and 90 °C, did not lose mass indicating good cooking integrity, i.e. a gel that keeps its structure during cooking. Acidification temperature thus greatly influenced cooking integrity. The effect was mainly ascribed to the density of the gel texture, a result of the speed of protein aggregation and calcium recovery.

UV-C light promotes the reductive cleavage of disulfide bonds in ß-Lactoglobulin and improves in vitro gastric digestion.

ß-Lactoglobulin (ß-Lg) is the main protein in whey and is known for its allergenicity and resistance to the digestion of pepsin and trypsin. The UV-C photoinduced cleavage of disulfide bonds in ß-Lactoglobulin, as promoted by excitation of tryptophan residues (Trp), is shown to induce changes in the protein's secondary structure, significantly reducing the protein's resistance to pepsin digestion. The UV-C light-induced changes in the protein secondary structure are marked by an increase in the contribution of ß-sheet and α-helix structures with a concomitantly smaller contribution of the ß-turn structural motif. The photoinduced cleavage of disulfide bonds in ß-Lg has an apparent quantum yield of ф = 0.0015 ± 0.0003 and was shown by transient absorption laser flash photolysis to arise by two different pathways: a) the reduction of the disulfide bond Cys66Cys160 occurs by direct electron transfer from the triplet-excited 3Trp to the disulfide bond due to the existence of a CysCys/Trp triad (Cys66Cys160/Trp61) and b) the reduction of the buried Cys106Cys119 disulfide bond involves a reaction with a solvated electron originated by the photoejection of electrons from the triplet-excited 3Trp decay. The in vitro gastric digestion index for UV-C-treated ß-Lg is revealed to have increased significantly by 36 ± 4 % and 9 ± 2 % under simulated elderly and young adult digestive conditions, respectively. When compared to the native protein, the peptide mass fingerprint profile of digested UV-C-treated ß-Lg shows a higher content and variety of peptides, including the production of some exclusive bioactive peptides such as PMHIRL and EKFDKALKALPMH.

Calcium bioaccessibility increased during gastrointestinal digestion of α-lactalbumin and ß-lactoglobulin.

Calcium bioaccessibility depends on the amount of soluble calcium under intestinal digestion. The changes in calcium during in vitro static digestion of α-lactalbumin and ß-lactoglobulin in presence of calcium chloride (0 mM, 20 mM and 50 mM) were followed by combining electrochemical determination of free calcium with the determination of soluble calcium by inductively coupled plasma optical emission spectroscopy. α-Lactalbumin and, more evident, ß-lactoglobulin were found to increase calcium bioaccessibility with increasing intestinal digestion time by around 5% and 10%, respectively, due to the complex binding of calcium to peptides formed from protein hydrolysis by gastrointestinal enzymes. In vitro digested samples of ß-lactoglobulin in presence of CaCl2 had nearly twice as much complex bound calcium as α-lactalbumin samples. The calcium bioaccessibility decreased significantly with the increasing concentration of added calcium chloride, although the amount of calcium chloride had little effect on the extension of digestion of α-lactalbumin and ß-lactoglobulin. Simulated digestion fluids were found to have a negative effect on calcium bioaccessibility, especially the presence of hydrogen phosphate, and the amount of precipitated calcium increased significantly with increasing amount of added calcium chloride. Based on analysis and visualization by sequences of the peptides formed during digestion of α-lactalbumin and ß-lactoglobulin, it was observed that peptides containing aspartic acid and glutamic acid acting as calcium chelators, may prevent precipitation of calcium in the intestines and increase calcium bioaccessibility. These results provide knowledge for the design of new dairy based functional foods to prevent calcium deficiency.

Effect of processing on in vitro digestibility (IVPD) of food proteins.

Proteins are important macronutrients for the human body to grow and function throughout life. Although proteins are found in most foods, their very dissimilar digestibility must be taking into consideration when addressing the nutritional composition of a diet. This review presents a comprehensive summary of the in vitro digestibility of proteins from plants, milk, muscle, and egg. It is evident from this work that protein digestibility greatly varies among foods, this variability being dependent not only upon the protein source, but also the food matrix and the molecular interactions between proteins and other food components (food formulation), as well as the conditions during food processing and storage. Different approaches have been applied to assess in vitro protein digestibility (IVPD), varying in both the enzyme assay and quantification method used. In general, animal proteins tend to show higher IVPD. Harsh technological treatments tend to reduce IVPD, except for plant proteins, in which thermal degradation of anti-nutritional compounds results in improved IVPD. However, in order to improve the current knowledge about protein digestibility there is a vital need for understanding dependency on a protein source, molecular interaction, processing and formulation and relationships between. Such knowledge can be used to develop new food products with enhanced protein bioaccessibility.

Spray-Dried Infant Formula Emulsion Stability as Affected by Pre-Heat Treatment and Total Solids Content of the Feed.

Pre-spray-drying processing may affect stability after reconstitution of emulsion-based powders, such as infant formulas. This study aimed to evaluate the effects of pasteurization temperature and total solids (TS) of the feed on the stability of the emulsions obtained from the reconstituted powders. Four infant formula powders (50%-75 °C, 50%-100 °C, 60%-75 °C, and 60%-100 °C) were produced at pilot scale, from emulsions with 50 or 60% TS pasteurized at 75 or 100 °C for 18 s. Both the emulsion feeds and the emulsions from the reconstituted powders (12.5% TS) were analyzed. The results showed that feeds with 60% TS were flocculated, as indicated by the large particle size and viscosity and the pseudoplastic behavior. Light microscopy revealed that, during spray drying, the flocs were disrupted in 60%-100 °C, while the 60%-75 °C emulsion remained flocculated, reducing its stability post-reconstitution. Although all four emulsions were mainly stabilized by caseins, the presence of ß-lactoglobulin was also detected at the oil-water interface, in native state in the formulas preheated at 75 °C and aggregated in the formulas preheated at 100 °C. In conclusion, both the degree of whey protein denaturation (resulting from pasteurization) and the TS of the concentrates during infant formula production affected the emulsion stability of the reconstituted powders.

Effect of Supplementing Dairy Goat Diets With Rapeseed Oil or Sunflower Oil on Performance, Milk Composition, Milk Fatty Acid Profile, and in vitro Fermentation Kinetics.

The aim of this study was to determine the effect of supplementing dairy goat diets with rapeseed oil and sunflower oil on performance, milk composition, milk fatty acid profile, and in vitro fermentation kinetics. Nine Danish Landrace goats with 42 ± 5 days in milk were allocated to three treatment groups for 42 days. Animals received a basal diet, formulated with 85:15 forage:concentrate ratio, and the basal diet was supplemented with either rapeseed oil or sunflower oil at 4% of dry matter. Goat milk was sampled on days 14, 21, and 42. Milk composition was similar between treatments. From day 14 to day 42, milk yield increased (1.03 vs. 1.34 kg/d), while milk fat (2.72 vs. 1.82 g/d) and total solids (11.2 vs. 9.14 %) were reduced. Compared to control and rapeseed oil, sunflower decreased (P < 0.05) C4:0 (1.56, and 1.67 vs. 1.36 g/100 g) and both oils decreased (P < 0.05) C18:3n3 (0.60 vs. 0.20 and 0.10 g/100g). Rapeseed oil increased (P < 0.05) C18:2 cis9, trans11 compared to control and sunflower oil (0.37 vs. 0.13 and 0.19 g/100 g). Untargeted milk foodomics revealed slightly elevated (P < 0.05) gluconic acid and decreased hippuric acid (P < 0.05) in the milk of oil-fed goats compared to control. In vitro dry matter degradation (63.2 ± 0.02 %) was not affected by dietary treatments, while individual volatile fatty acid proportions, total volatile fatty acids (35.7 ± 2.44 mmol/l), CO2 (18.6 ± 1.15 mol), and CH4 (11.6 ± 1.16 mol) were not affected by dietary treatments. Sunflower oil and rapeseed oil decreased (P < 0.05) total gas production at 24 and 48 h compared with control. Overall, the use of sunflower oil or rapeseed oil at 4% DM inclusion did not compromise animal performance and milk composition.

High shear cooking extrusion to create fibrous mozzarella cheese from renneted and cultured curd.

To understand shearing on cheese curds during high shear extrusion, the controlable parameters of a twin-screw extruder were related with measured and calculated parameters that characterise the extrusion process effects on product properties. Curd properties were correlated with specific mechanical energy SME (23-390 kJ·kg-1), Texit (22-54 °C) and residence time RT (36-507 s); the wide experimental range studied provided new insights regarding extrusion of cheese curds. Longer and finer fibers were produced at low SME (23-27 kJ·kg-1), high Texit (50-54 °C) and short RT (55-60 s). Whereas extruded curds produced at high SME (166-390 kJ·kg-1), low Texit (22-23 °C) and long RT (371-396 s) tend to form a compact structure with less fiber formation. Temperature in the heating section, Th, and temperature of the cooling die, Tc, were found to determine critical curd phase transitions during extrusion, from viscoelastic solid to viscoelastic liquid and vice versa, that are important for the creation of fibrous cheese curd structures. Tc was the most important factor influencing SME, indicating the considerable contribution of the cooling process in increasing the shear forces. Curd composition and textural properties were significantly influenced by Th and Tc, showing that a higher Th enhances curd elasticity and reduces melt strength while a higher Tc induces lower water content and increases melt strength. We concluded that a variety of structured mozzarella products with customized properties can be produced by controlling the extrusion parameters.

Goat Milk Foodomics. Dietary Supplementation of Sunflower Oil and Rapeseed Oil Modify Milk Amino Acid and Organic Acid Profiles in Dairy Goats.

The dietary supplementation of vegetable oils is known to improve the dietary energy density as well as milk fatty acid profile; however, the impacts on the milk foodome is largely unknown. This study investigated the effect of two different sources of unsaturated fatty acids, rapeseed oil and sunflower oil, as a feeding supplement on the milk foodome from dairy goats. Nine Danish Landrace goats at 42 ± 5 days in milk were allocated to three treatment groups for 42 days with three animals per group. A control group received a basal diet made of forage and concentrate at an 85:15 ratio. On top of the basal diet, the second and third groups received rapeseed oil or sunflower oil supplements at 4% of dry matter, respectively. Goat milk was sampled on days 14, 21, and 42. The milk foodome was measured using gas chromatography-mass spectrometry and proton nuclear magnetic resonance spectroscopy. The milk levels of 2-hydroxyisovaleric acid, oxaloacetic acid, and taurine were higher in the milk from goats fed with sunflower oil compared to the control group. More glucose-1-phosphate was found in the milk from goats fed with rapeseed oil compared to the control group. Amino acids, valine and tyrosine, and 2-hydroxyisovaleric acid and oxaloacetic acid were higher in the sunflower group compared to the rapeseed group, while the milk from the rapeseed-fed goats had greater levels of ethanol and 2-oxoglutaric acid compared to the sunflower group. Thus, results show that foodomics is suitable for studying how milk chemistry changes as a function of feeding regime.

Temperature effects on calcium binding to caseins.

The kinetics of binding of calcium ions in molar excess to individual caseins and casein ingredients was studied in pH 6.4 aqueous solutions using stopped-flow absorption spectroscopy. An initial second-order reaction, faster for ß-casein than for αs-casein due to lower energy of activation (ΔEa1,ß = 8.2 kJ∙mol-1; ΔEa1,α = 18.1 kJ∙mol-1, respectively), is followed by a slower first-order reaction with similar energies of activation (ΔEa2,ß = 25.3 kJ∙mol-1 and ΔEa2,α = 20.7 kJ∙mol-1) as determined from temperature dependence of rate between 25 °C and 50 °C. Sodium caseinate reacts faster with calcium than both αs-casein and ß-casein in the first reaction of the two consecutive reactions, while the rate of the second falls between αs-casein and ß-casein. Global spectral analysis showed the UV-visible spectra of the reaction intermediates of the caseins to be more similar to the final products than to the initial casein reactants. Dynamic and static light scattering indicated decreasing particle sizes and increasing particle surface upon calcium-binding most significantly at low temperatures. The calcium binding to casein was found endothermic by isothermal titration calorimetry. Calcium binding seems to be controlled by enthalpy/entropy compensation corresponding to an isoequilibrium temperature of 38 °C in agreement with binding of calcium to o-phosphoserine rather than to aspartate or glutamate side chains of the caseins. Binding capacity and affinity for calcium to αs-casein and sodium caseinate both increased with increasing temperature in agreement with the endothermic nature of the binding. Decreasing enthalpy of binding for each calcium indicating a decrease in heat capacity of the caseins upon calcium-binding. The small difference between binding enthalpy and energy of activation for association of calcium to αs-casein lead to the conclusion that calcium dissociation goes through an early transition state. The rate of calcium dissociation hardly depends on temperature also explaining why calcium binding to caseins is important for calcium bioaccessibility.

Lactose Mother Liquor Stream Valorisation Using an Effective Electrodialytic Process.

The integrated electrodialysis (ED) process supports valorisation of a lactose-rich side stream from the dairy industry, creating an important source of milk sugar used in various branches of the industry. This work focuses on the optimization of the downstream processes before the crystallization of lactose. The process line includes a pre-treatment and desalination by ED of the industrial waste solution of the lactose mother liquor (LML). The LML was diluted to 25% total solids to overcome hydraulic issues with the ED desalination process. Two different levels of electrical conductivity reduction (70% and 90%) of the LML solutions were applied to decrease the mineral components and organic acids of the LML samples. The ED performance parameters such as ash transfer rate (J), the specific capacity (CF) of the ED and specific electric energy consumption (E) were determined and the influence of the LML solution on the monopolar ion-exchange membranes has been investigated. A higher degree of desalination is associated with higher electric energy consumption (by 50%) and lower specific capacity (by 40%). A noticeable decrease (by 12.8%) in the resistance of the anion exchange membranes was measured after the trials whereas the resistance of the cation exchange membranes remained practically unchanged. Any deposition of the alkaline earth metals on the membrane surface was not observed.

Increasing calcium phosphate aqueous solubility and spontaneous supersaturation combining citrate and gluconate with perspectives for functional foods.

Uptake of calcium from food depends on solubility of calcium salts in the intestines, and precipitation of calcium phosphates decreases bioaccessibility of food calcium. Citrate as a high affinity complex binder for calcium was found spontaneously to create strongly supersaturated solutions by rapid dissolution of calcium hydrogen phosphate characterized by short lag phases for precipitation. Gluconate with weaker affinity for calcium binding showed longer lag phases for precipitation from supersaturated solutions. For citrate/gluconate combinations, the highest degree of supersaturation with longest lag phases for precipitation were found by trial-and-error experiments for a citrate/gluconate ratio of 1:10 for dissolution of calcium hydrogen phosphate resulting in supersaturation factors around three and without precipitation for more than a month. The aim of the present study was to provide a physicochemical explanation of this robust supersaturation. Calcium speciation based on electrochemical calcium activity measurement identified a low [Ca2+]·[HCitr2-] product as critical for supersaturation.

Effect of Water Temperature and Time during Heating on Mass Loss and Rheology of Cheese Curds.

During the manufacturing of mozzarella, cheese curds are heated to the desired stretching temperature traditionally by immersion in water, which influences the curd characteristics before stretching, and consequently the final cheese properties. In this study, cheese curds were immersed in hot water at 60, 70, 80 and 90 °C up to 16 min and the kinetics of mass loss and changes of rheological properties were investigated. The total mass of cooked curds increased up to 10% during the first minute, independent of the temperature, as a consequence of water retention. Fat was the main component lost into the cooking water (<3.5% w/w), while the concentration of protein increased up to 3.4% (w/w) compared to uncooked curds due to the loss of other components. Curds macrostructure during cooking showed that curds fully fuse at 70 °C/4 min; 80 °C/2 min and 90 °C/1 min, while after intensive cooking (>8 min) they lost the ability to fuse as a consequence of protein contraction and fat loss. Storage modulus, representing the curd strength, was dependent on cooking temperature and positively, and linearly, correlated with curd protein content (21.7-24.9%). This work shows the potential to modify curd composition and structure, which will have consequences for further processing and final product properties.

Calcium: A comprehensive review on quantification, interaction with milk proteins and implications for processing of dairy products.

Calcium (Ca) is a key micronutrient of high relevance for human nutrition that also influences the texture and taste of dairy products and their processability. In bovine milk, Ca is presented in several speciation forms, such as complexed with other milk components or free as ionic calcium while being distributed between colloidal and serum phases of milk. Partitioning of Ca between these phases is highly dynamic and influenced by factors, such as temperature, ionic strength, pH, and milk composition. Processing steps used during the manufacture of dairy products, such as preconditioning, concentration, acidification, salting, cooling, and heating, all contribute to modify Ca speciation and partition, thereby influencing product functionality, product yield, and fouling of equipment. This review aims to provide a comprehensive understanding of the influence of Ca partition on dairy products properties to support the development of kinetics models to reduce product losses and develop added-value products with improved functionality. To achieve this objective, approaches to separate milk phases, analytical approaches to determine Ca partition and speciation, the role of Ca on protein-protein interactions, and their influence on processing of dairy products are discussed.

Enthalpy-entropy compensation in calcium binding to acid-base forms of glycine tyrosine dipeptides from hydrolysis of α-lactalbumin.

Calcium binding to peptides formed by hydrolysis of whey proteins during digestion is important for calcium uptake in the intestines and affects the antioxidant function of the peptides. For the two dipeptides, Gly-Tyr and Tyr-Gly, potential hydrolysis products of α-lactalbumin, calcium binding to the three forms of each dipeptide in acid-base equilibrium at intestinal pH was determined electrochemically and compared to binding to tyrosine for aqueous 0.16 M NaCl for 5 < pH < 9 at 15 °C, 25 °C, and 37 °C. At milk pH at 25 °C, binding of calcium to the zwitterion of GlyTyr dominates, with an association constant Kass2 = 22 M-1 with ΔH0 = -46 kJ·mol-1, while binding to the mononegative TyrGly dominates for TyrGly with Kass3 = 32 M-1 and ΔH0 = -38 kJ·mol-1. At intestinal conditions, pH = 7 and 37 °C, binding of calcium has similar affinity for GlyTyr and TyrGly, while at higher pH and lower temperature, GlyTyr binds stronger. Density Functional Theory calculations confirmed a stronger binding to the zwitterion of GlyTyr than of TyrGly and an increasing affinity with increasing pH for both. Calcium binding to the acid/base forms of the dipeptides is at neutral pH strongly exothermic with ΔH0 becoming less negative at higher pH, and a linear enthalpy-entropy compensation (r2 = 0.99) results in comparable binding important for calcium bioavailability along the changing distribution among acid-base forms. Calcium binding decreases radical scavenging rate and antioxidative activity of both dipeptides.

The relationship between ultra-small-angle X-ray scattering and viscosity measurements of casein micelles in skim milk concentrates.

Skim milk concentrates have important applications in the dairy industry, often as intermediate ingredients. Concentration of skim milk by reverse osmosis membrane filtration induces water removal, which reduces the free volume between the colloidal components, in particular the casein micelles. Thermal treatment before or after concentration impacts the morphology of casein micelles. These changes affect the flow behavior and viscosity, but the consequences for supermicellar structure have not been elucidated. In the present study, skim milk concentrates with different total solid contents from 8.7% (control) up to 22.8% (w/w), prepared by reverse osmosis membrane filtration of non-heated and pasteurized skim milk, were heat treated at 75 °C for 18 s, and compared with non-heated concentrates. The structure of the concentrates was studied using Ultra Small Angle X-ray Scattering (USAXS), and the viscosity of concentrates was measured. The USAXS intensity I(q) was fitted at small and intermediate q-regions (0.0005 < q < 0.003 Å-1 and 0.0035 < q < 0.03 Å-1, respectively) with a power law. The value of the power law exponent was used to assess the heat- and concentration-induced aggregation of the milk solids and correlate it with the apparent viscosity. The results showed that increased viscosity of skim milk concentrates, due to water removal and heat-load, can be explained by increased aggregation of the casein micelles into elongated aggregates and increased smoothening of the casein micelle surface.

3D printing of a high protein yoghurt-based gel: Effect of protein enrichment and gelatine on physical and sensory properties.

The potential application of 3D printing technology in creating protein-rich desserts with multisensory design was investigated. Yoghurt-gel inks were formulated by varying the concentration of gelatine and whey protein isolate (WPI). Assessment of rheological and textural properties prior to printing, showed that an increase of gelatine concentration from 7.5 to 12.5% w/w increased the yield stress, storage modulus, loss modulus, firmness, and resilience of yoghurt gels. Addition of 12% WPI reduced these effects; creating softer gels with reduced resilience. However, these gels showed stable shape after printing, especially in formulations with higher gelatine concentrations. The changes in textural properties caused by the extrusion process need to be considered when designing yoghurt gels, as a significant reduction in firmness and resilience and an increase in adhesiveness were observed after 3D printing. The more stable and well-shaped 3D printed yoghurt gels were obtained by the combined effect of WPI and gelatine which provided a good balance of appearance, taste, flavour, and mouthfeel attributes evaluated by a trained sensory panel. A consumer study performed with thirty healthy adults showed the potential to improve sensory acceptance through the creation of multisensory layered design.